1428 High performance structural bonding acrylic adhesive
Transport vehicles, notebook computer, mobile phone and other
products such as structural adhesive bonding electrons.
Bonding material: ABS, glass steel, polyester (DCPD modified)
polystyrene, polyethylene ester, PVC, polyurethane, coating
Carbon steel, aluminum and stainless steel recommended HuiTian
|Component of Basic Materials||acrylic acid|
|Mix Ratio by weight (A:B)||10:1|
|Handing Curing Time||Min||6|
|Initial Curing Time||Hour||0.5|
|Full Curing Time||Hour||24|
|Tensile Strength||After Curing||Mpa||20|
|Elongation at break||%|
|Flame Retardant Rating||UL94 V-1|
Resistance PH 3-10 acid, hydrocarbons, salt solution. Not resistant
to polar solvent, acid and alkali.
Through a fixed mixing ratio of the mixing nozzle mix, with manual,
pneumatic or equipment gluing
Before curing is easier to clean, wipe the lotion, overflow
adhesive residue available containing citric acid, terpene resin or
NMP degreasing agent scrub in order to achieve the best results. If
the layer has been cured, carefully will layer off, and wipe the
lotion good cleaning effect.
Matters need attention
1．This product is flammable, away from heat and flame, spark store
2．Not including the adhesive materials: PP, PE, POM, PTFE, copper,
3．All stainless steel, aluminum, mixing equipment be Teflon or PE
material. Filler, pump shall not use copper or copper alloy. The
sealing ring must use Teflon, Teflon coated PVC, PE/PP, VITON, NBR,
chloroprene rubber or other elastic body shall not be.
4．This product is curing very fast, generates a lot of heat when
mass mixing, and may be accompanied by release of gas, steam and
other volatiles. Therefore, should be in every time limited
quantity in mixed operation time can run out, and the adhesive
thickness is controlled within 3.2mm
50ml/ Double tube, 12 double tube /carton.
1.Store it in dry and shady places at the temperature of 12~24℃ is
2.A component Storage life: 12 months,,B component 9months
3. Could not frozen storage