8960H Single component PU Sealant FOR windshield assembly
Technical Data Sheet
HT 8960H high-performance polyurethane adhesive is single
component, black, high strength, medium viscosity and low shrink.
Bond line will become elastomer after curing, has good resistance
for heat , cold changed and variation of stresses. Be appropriate
for pneumatic glue gun or mechanical arm to construct, excellent
thixotropy, no flowing, low curing contractibility rate, get
acknowledgement from auto original factory.
Auto original factory glass bonding and sealing, widely used in
car, passenger car, high-speed train and other large windshield
glass bonding and sealing.
Features before curing
|Chemical composition||Polypropylene oxide|
|Best working time||10-35|
Features after curing
Clean surface: clean up the glueing face, eliminate rust, dust, water and greasy
Glueing: cut a proper hole on the glue tube opener, the hole’s inner
diameter must on the basis of glueing width, loaded on glue gun,
then start on glueing.
Base coate: should cooperate with appointed activating agent 8902 and
appointed base coating agent 8906 or glass finishing agent. Base
coate drying time usual is 10-30 minutes, specific time is depend
on work temperature, start to glue after drying.
Curing: environmental humiture have big impact on polyurethane glue’s
drying time and curing. Humiture too low, curing will slow down;
humiture too high, drying will be fast. The best operating
environment is: temperature 20～30℃, humidity 50～70%RH. Construction
should be careful if over these data. During glueing and curing,
polyurethane glue must avoid touching chemicals which contain
hydroxy, amino, this metarial will lead to polyurethane glue not
curing or curing is not fully.
How to store: tighten up unspent glue immediately and seal the opening to keep.
Next use, the opening would have a little crust, just wipe if off
use it as usual. During keeping, orifice possible have a little
crust, eliminate it would not affect performance.
Store away from children.
If product touch your eyes carelessly, wipe your eyes with cloth
before curing, then wash with water.
If product touch your skin carelessly, flush with water
We suggest to use it in a place with good ventilation.
The product’s safety data please read MSDS as reference.
Order goods: 896204, 310ml/tube, 24tube/carton.
896206, 600ml/tube, 20tube/carton
896208, 20kg/ bucket, 1 bucket/box
896209, 250kg/ bucket, 2 bucket/box
Be stored in 8～28℃ cool and dry place.
Storage period:hard package is 9 months.
soft package is 6 months