9335 silicone sealant for cars, winds, glasses, for sealing of old
Blue Power-seal seal products back after contact with
moisture-cured to form a silicone rubber gasket having flexibility.
The product has anti-aging, weathering, heat, will not harden,
shrink or crack and other properties. It is mainly used engine oil
pan, transmission gear cover, axles and other parts of the bonding
and sealing. This product is suitable for a temperature range of
-60 ℃ ~ 300 ℃
This product is not binding limit the size and shape of the face,
can replace a variety of rubber, asbestos mat, cork pad and paper
pad, to the flange of the automobile, motorcycle engines, gear
boxes, axles and various machinery and equipment combined with the
implementation of the sealing surface.
|Properties before Curing|
Dry Time, min:
(Curing Condition: temperature 25℃,50±5%RH)
|Properties after Curing|
|Tensile Strength, N/mm2||≥1.5|
|Tensile Strength, %||400|
|Hardness shore A||30|
|At 125 ℃, 30 # 24h after oil immersion|
|Tensile strength,||N / mm2 ≥ 1|
|Elongation at break,%||≥ 400|
At 200 ℃, after 168h
|Tensile strength||N / mm2 ≥ 1|
|Elongation at break,%||≥300|
How to Use:
1, with cotton and organic solvent to be sealed remove surface oil
2, the plastic tube in a suitable whole cut beak, with the glue gun
glue to end faces to be sealed, and allowed to form a continuous
3 close two seal faces and secured with bolts.
4, one hour early solid, at 25 ℃, 50% humidity, fully cured within
24 hours. In cooler or dry conditions takes a long time to cure.
5, sealed hose sealant remaining can be used until the next one.
Storage In a cool dry place for one year.